-
Applied to signal synchronization acquisition;
- Anti-Shock>100g, best for vehicle crash tests;
- 2chs trigger input and 8chs trigger output;
- Built-in battery and charging management;
- Battery On, Remaining Capacity and Status LED indicator;
- All input and output are isolated and ESD protection.
Trigger distributor box TRG-8S is mainly designed for vehicle crash test. It can also be used for multi-devices synchronous trigger during tests. The trigger input is usually connected to a ribbon switch or a photoelectric switch. Trigger outputs can connect with data acquisition, airbag squib device, cameras, etc. All channels are optically isolated. And built-in battery is with UPS function.
Specification (25℃)：
| Name | Unit | Value |
| Trigger input | Channels | 2 |
| Input type | Switch (TTL optional) | |
| Trigger out | Channels | 8 |
| Output type | Switch (TTL optional) | |
| Output driver | mA | 50 |
| Load voltage range | V | 1.5~36 |
| Consumption | W | <5 |
| Power voltage | V | 12 |
| Battery work time | hours | >30 |
| Battery capacity | mAh | 3400@12V |
| Trigger delay | μs | <50 |
| Input connector | LEMO | FGG.1B.305 |
| Output connector | LEMO | FGG.1B.302 |
| Indicator | LED | Capacity |
| Indicator | LED | Trigger out |
| Mounting | / | 6×M4 |
| Material | / | Al. Alloy |
| Weight | grams | 525 |
| Dimension | mm | 230×64×43 |
The power adapter is included.
Dimension:
Connector Pin Assignment:
Trigger Input (LEMO EGG.1B.305)
| Pin 1 | Trigger Input+ |
| Pin 2 | Trigger Input- |
| Pin3~Pin5 | Do Not Use |
| Pin 1 | Switch Output+ |
| Pin 2 | Switch Output- |
 |
Trigger Distribution Box TRG-8S |