Calibration System

aPLI/Flex-PLI Stationary Calibration System SCS-PLI

  • Suitable to aPLI and Flex-PLI;
  • According to Manufacture and ECE R127;
  • Including aPLI Bone, Femur/Tibia/Knee Assembly;
  • Including Flex-PLI Bone, Femur/Tibia/Knee Assembly;
  • Supply Calibration Fixtures;
  • Controlled by Electronic Universal Testing Machine;
  • High Precision Reference Load Cell, up to 22kN;
  • High Precision Reference Pot. Meter, Range 100mm;
  • Calibration Report Generate, and Template Modifiable;
  • Support Upgrade with more Function Modules (e.g., Seatbelt Load Cell, Dummy Load Cell Calibration).
Stationary Calibration System SCS-PLI is designed for Pedestrian Legforms according to the requirement of Manufacture Instruction and ECE R127. The system mainly includes Loading Frame, Reference Load Cell, Reference Displacement, Data Acquisition Device, Sensor Interface Box, Calibration Fixtures and Software.
 
Technical Specification (20℃±2℃, 30%RH~75%RH):
Name Result
Loading Force Max. 50kN
Loading Frame Moving ≥600mm
Loading Frame Moving Rate 0.1mm/min~500mm/min
Reference Load Cell 9kN,22kN
Ref. Load Cell Non-Lin. ≤±0.035% FS
Reference Displacement 100mm
Ref. Displacement Non-Lin. ≤±0.07% FS
Data Acquisition Device 8-Chs 24bit A/D Simultaneous
Excitation Voltage 5V or 10V
Range: ±10mV/V~±1V/V
Sampling Frequency≥20kHz
Sensor Interface Support Connector LEMO EGG. 1B.307
Full/Half Bridge, Voltage Mode
Support SHUNT Check
Connecting Cable Supplied
Mainly Machine Weight About 1500kg
Power 1.5kW 3P 380V±10%
1kW 1P 220V±10%
Others Including Raised Platform
Including Safety Shield

APLI Tibia Assembly Calibration Picture:


Flex-PLI Stationary Calibration Software:


aPLI/Flex-PLI Stationary Calibration System SCS-PLI