-
Professional to apply DDAS technology;
- Very suitable to DAS of aPLI and Flex-PLI;
- 8×RS485 data bus, up to 96 sensor channels @ 20kHz;
- Flash Memory inside, the date can be recorded;
- Software and hardware trigger are supported;
- UPS Battery inside;
- Ethernet communication, Adapter Box included;
- Anti-Shock≥100g@6ms.
The DR-PLI is designed for Vehicle Pedestrian Protection Test Legform Impactor. It meets the leg type collection requirements of Flex-PLI and aPLI. Through the ADM module (ADM-Hub), the data is transferred to DR-PLI for collection and recording. It has a built-in rechargeable lithium battery and a Flash memory that is not lost when power is off; it also provides a redundant mechanism for software Start Recording trigger, external T0 signal trigger, off-line T0 trigger, and analog threshold T0 trigger, ensuring that the test is simple and reliable.
Specification (25℃):
Specification (25℃):
| Name | Unit | Value |
| Sensor Channels | Channels | 36 |
| Sampling Frequency | kHz | 20 |
| Recording Time | s | >300 |
| Flash Memory | MB | 256 |
| Trigger Input | / | SR&T0 |
| RS485 Speed | Mbit/s | 6 |
| Current Output | mA | 500/port |
| Ethernet | Mbit/s | 100 |
| Power Input | With Adapter | 24V~48V |
| Power | W | 30 |
| Operation Temp. | ℃ | 5~40 |
| Weight (with battery) | grams | 150 |
Flex-PLI: Omnetics 12pins connector, will switch into LEMO FGG.2B.312 by the extend cable.
aPLI: Magnet connector, will switch into LEMO FGG.2B.312 by the extend cable.
DP-PLI application on Flex-PLI:
Connecting diagram with sensors for Flex-PLI:
 |
Data Acquisition Device DR-PLI |