-
Professional to apply DDAS technology;
- Suitable to DDAS sensor and dummy debug or calibration;
- 8×RS485 data bus, up to 96 sensor channels @ 20kHz;
- Flash Memory inside, the date can be recorded;
- Software and hardware trigger are supported;
- Ethernet Communication and 110VAC~250VAC power supply.
The static data collector DR-8S is an off-board version of the DDAS data collector, suitable for daily calibration of digital sensors and In-Dummy, TEDS information reading and writing, data collection, etc. It works directly on single-phase mains power and has a standard RJ45 network cable interface. The sensor is plug-and-play and can be placed on the work desktop for easy operation.
Specification (25℃):
Specification (25℃):
| Name | Unit | Value |
| Sensor Channels | Channels | 96 |
| Sampling Frequency | kHz | 20 |
| Recording Time | s | >270 |
| Flash Memory | GB | 1 |
| Trigger Input | / | SR&T0 |
| RS485 Speed | Mbit/s | 6 |
| Current Output | mA | 500/port |
| Ethernet | Mbit/s | 100 |
| Status LED | / | POW/TRG/COM |
| Power Supply | VAC | 110~250 |
| Power | W | 45 |
| Operation Temp. | ℃ | -20~40 |
| Weight | kg | 3.0 |
T0 Trigger Connector
| T0 Connector | DB-15F |
| Pin 2 | T0 RS485+ |
| Pin 3 | T0 Switch+ |
| Pin 4 | T0 GND, Switch Return. |
| Pin 5 | GND |
| Pin 10 | T0 RS485- |
| Others | NC |
Front and Rear Pannels:
 |
Stationary Data Acquisition Device DR-8S |