Sensor

Angular Rate Sensor ARS-2001

  • Applied to angular rate measurement in any harsh environment, vehicle crash test;
  • Small size, easy to install;
  • Excitation voltage 5V;
  • Based on MEMS technology;
  • Built-in Lower Pass Filter, response from DC to 300Hz;
  • Anti-Shock >5000g.
The angular rate sensor ARS-2001 is based on the principle of the resonator gyroscope and contains multiple vibration frames. When the detection structure rotates, the Coriolis force generated changes a capacitance structure, which is then converted into electrical signal changes, thus realizing angular velocity measurement. The independent power supply is completely isolated from the measurement system, and the direct output voltage signal has a good linear relationship with the measured current.

Specification (5V, 25℃):
Name Unit Value
Range deg/sec ±1800
Linear Acc. Effect dps/g ±0.05 (typical)
Non-Linearity %FS <0.5
Response Hz DC-300
Offset mV/V <10
Warmup ms <3
Excitation VDC 5
Consumption mA <5
Anti-Shock g 5000
Insulation Res. >100
Opera. Temp. -40~95
Store Temp. -40~105
Material / Al. Alloy
Mass grams <2
Dimension mm 7.5×10.2×14.6
Wire length default 8m;
The connector and ID as required.

Dimension:
 
Wires define:
Red Excitation+
Black Excitation-
Green Signal+
White Signal-
Shield Connector Case
Angular Rate Sensor ARS-2001