Sensor

Angular Rate Sensor ARS-2002

  • Applied to angular rate measurement in any harsh environment, vehicle crash test;
  • Compliant to SAE J2570-2019;
  • Excitation voltage 5V;
  • Based on MEMS technology;
  • High response frequency from DC to 2000Hz;
  • Anti-Shock>5000g.
The angular rate sensor ARS-2002 is based on the principle of the resonator gyroscope and contains multiple vibration frames. When the detection structure rotates, the Coriolis force generated changes a capacitance structure, which is then converted into electrical signal changes, thus realizing angular velocity measurement. The independent power supply is completely isolated from the measurement system, and the direct output voltage signal has a good linear relationship with the measured current.

Specification (5V, 25℃):
Name Unit Value
Range deg/sec ±8000
Over range deg/sec ±18000
Linear Acc. Effect dps/g ±0.1(typical)
Non-Linearity %FS <0.5
Response Hz DC-2000
Offset mV/V <10
Warmup ms <3
Excitation VDC 5
Consumption mA <5
Anti-Shock g >5000
Insulation Res. >100
Opera. Temp. -40~95
Store Temp. -40~105
Material / Al. Alloy
Mass grams <2
Dimension mm 7.5×10.2×14.6
Wire length default 8m;
The connector and ID can be required.

Dimension:
 
Wires define:
Red Excitation+
Black Excitation-
Green Signal+
White Signal-
Shield Connector Case
 
Angular Rate Sensor ARS-2002