- Suitable to angular rate measurement under harsh condition；
-
Small size to easy mounting；
- Ready mounting positions for 3 pcs 7264C；
- Power supply with 5V；
- Low pass filter inside；
- Anti-Shock >5000g.
The 3-Axis angular rate sensor ARST-2001 is based on the principle of resonator gyroscope and contains multiple vibrating beams. When the structure rotation is detected, the capacity will be changed by Coriolis force generated. Then the angular rate can be measured by capacity converting into voltage signal. ARST-2001 supplies mounting positions for 3 pcs accelerometer 7264C. The length of wear-resistant cable and Dallas ID can be required.
Specification （with 5V excitation, 25℃）：
| Name | Unit | Value |
| Measure Range | dps | ±1800 |
| Linear Acc. Effect | dps/s | ±0.05 (typical） |
| Non-Linearity | %FS | <0.5 |
| Bandwidth | Hz | DC-300 |
| Offset | mV/V | <10 |
| Warmup | ms | <50 |
| Excitation | VDC | 5 |
| Consumption | mA | <15 |
| Anti-Shock | g | 5000 |
| Isolation Resistance | MΩ | >100 |
| Operation Temp. | ℃ | -40~95 |
| Storage Temp. | ℃ | -40~105 |
| Case Materials | / | Al. Alloy |
| Weight | grams | <50 |
| Dimension | mm | 28×28×15 |
Dimension：
Wire Assignment:
| Red | Excitation+ |
| Black | Excitation- |
| White | Signal- |
| Green | Signal+ |
| Shield | Connector Case |
 |
Angular Rate Sensor ARST-2001 |