-
Suitable for seatbelt displacement measurement of vehicle, especially to Crash Test;
- Measure resolution: 0.5mm;
- Response up to 50m/s;
- Industrial design and high-quality components;
- High contrast and adhesive stickers;
- Lower power consumption;
- ID Module optional.
Based on light barriers scan, the sensor can measure the linear seat belt movement. For real time, the sensor can converter the result into analog output. There is high performance DC/DC with isolation as power supply. The sensor is good to against ESD and power surge. SBDS-10V includes high quality cables, whose length can be selected. It is also available to Connector and Dallas ID (or TEDS) if needed.
Technical Specification:
（under 10V excitation voltage and 25℃）：
| Name | Unit | Value |
| Range | mm | ±1000 |
| Resolution | mm | 0.5 |
| Output | V | ±2.5 |
| Excitation | V | 5-15 |
| Offset | mV/V | <2 |
| Current | mA | <25 |
| Output Res. | Ω | <100 |
| Temperature | ℃ | 0~60 |
| Ambient Light | Lx | <100000 |
| Shock | g | >100 |
| Isolation Res. | MΩ | >100 |
| Status Display | LED | Power/Direction |
| Mounting | / | 2×M4 |
| Case Materials | / | Al. Alloy |
| Weight | grams | 102 |
| Size | mm | 70×56×20.7 |
Default: without connector and Dallas ID.
Dimension (mm)：
Wires Define：
| Red | Excitation+ |
| Black | Excitation- |
| White | Signal+ |
| Green | Signal- |
| Shield | Connector Case |
Note: Digital Output Version (JEBOOL ADM or Kistler DTI) is optional without Noise.
 |
Seatbelt Displacement Sensor SBDS-10V |